INSPECTION
NEED TO CHECK?
LOGBOOK SERVICE
(10,000km SERVICE)
$160〜
1.5h-
The inspection will be performed in accordance with the inspection items and timings set by each car manufacturer. When you buy a new car, a LOGBOOK (inspection record book or warranty) is always included with the car owner's manual. The inspection in accordance with the LOGBOOK is called "LOGBOOK SERVICE".
4cylinder $160
6cylinder $170
8cylinder $180
Quick Service
(10,000km SERVICE)
$100
0.5h-
We inspect the engine compartment, the outside of the car (body surfaces and windows), and the underside of the car.
-
-
-
-
-
Checking for Used Car
(10,000km SERVICE)
$100
0.5h-
We will inspect your prospective used car for any defects or abnormalities. Please come to us with the vehicle you are considering.
-
-
-
-
-
LOGBOOK SERVICE (10,000km service)
$160〜
1.5h-
The inspection will be performed in accordance with the inspection items and timings set by each car manufacturer. When you buy a new car, a LOGBOOK (inspection record book or warranty) is always included with the car owner's manual. The inspection in accordance with the LOGBOOK is called "LOGBOOK SERVICE".
4cylinder $160
6cylinder $170
8cylinder $180
Quick Service
$100
0.5h-
We inspect the engine compartment, the outside of the car (body surfaces and windows), and the underside of the car.
Checking for used car purchase
$100
0.5h-
We will inspect your prospective used car for any defects or abnormalities. Please come to us with the vehicle you are considering.
-INFORMATION-
※Please note that 4WD, 1BOX and European models will be charged an additional 10% of the above price.
※The above rates do not include GST (10%).
-INFORMATION-
※Please note that 4WD, 1BOX and European models will be charged an additional 10% of the above price.
※The above rates do not include GST (10%).
THE IMPORTANCE OF INSPECTION
MAINTENANCE
No matter how advanced automotive technology is, the need for inspection and maintenance has not disappeared. Wear and tear on the components will always progress over time.
In order to use your vehicle safely and comfortably in the long term, it is necessary to maintain the vehicle's original performance.
Neglecting daily maintenance can lead to vehicle breakdowns and in addition to causing traffic accidents, they also cause traffic congestion.
Air pollution caused by harmful exhaust gases and other pollutants also cause health hazards for humans and degradation of the global environment. Drivers need to be aware that they can be both victims and perpetrators.
In order to prevent these problems, it is important to periodically inspect and maintain your vehicle and to understand the wear and tear of internal parts such as brakes and engine, which can only be checked and disassembled by a professional mechanic, so that you can drive your car with peace of mind at all times.
THE IMPORTANCE OF INSPECTION
MAINTENANCE
No matter how advanced automotive technology is, the need for inspection and maintenance has not disappeared. Wear and tear on the components will always progress over time.
In order to use your vehicle safely and comfortably in the long term, it is necessary to maintain the vehicle's original performance. Neglecting daily maintenance can lead to vehicle breakdowns and in addition to causing traffic accidents, they also cause traffic congestion.
Air pollution caused by harmful exhaust gases and other pollutants also cause health hazards for humans and degradation of the global environment. Drivers need to be aware that they can be both victims and perpetrators.
In order to prevent these problems, it is important to periodically inspect and maintain your vehicle and to understand the wear and tear of internal parts such as brakes and engine, which can only be checked and disassembled by a professional mechanic, so that you can drive your car with peace of mind at all times.
INSPECTION TIMING
WHEN TO CHECK?
Below are the signals of inspection is required.
It's been over six months since the last inspection.
The inspection schedule in the logbook is overdue.
It's already got over 5,000 miles on it since the last engine oil change.
I think I'm getting worse fuel mileage than I used to.
(This could be due to degraded engine oil, low air pressure, or a clogged air filter.)
CHECK POINTS
PROFESSIONAL SERVICE
Based on the Japanese inspection standards, 56 items are checked.
1. LIGHT
Check that the headlights, tail lights and other lighting devices are working properly.
2. ENGINE ROOM
Check grease, coolant, drive belt, spark plugs, battery, etc.
3. TYRE
Check for correct inflation pressure and tire cracking damage.
4. SUSPENSION
Check the suspension for oil leaks and damage to rubber parts, and check the connection between the body and the tires.
5. BRAKE
Check for problems such as brake pad levels, brake oil leaks from brake calipers, and damage to rubber parts.
6. BEHIND
Check the underside of the vehicle for oil and water leaks and other problems such as damage to rubber parts.
7. TEST DRIVING
The mechanic will perform an actual drive test and final confirmation of the noise and brake effectiveness during driving and driving.
8. PREPARATION
After all inspections are completed, we will compile a report on the condition of the vehicle and hand it over to you.
INSPECTION TIMING
WHEN TO CHECK?
Below are the signals of inspection is required.
It's been over six months
since the last inspection.
The inspection schedule
in the logbook is overdue.
It's already got over 5,000 miles
since the last engine oil change.
I think I'm getting worse fuel mileage.
(This could be due to degraded engine oil,
low air pressure, or a clogged air filter.)
1. LIGHT
Check that the headlights, tail lights and other lighting devices are working properly.
2. ENGINE ROOM
Check grease, coolant, drive belt, spark plugs, battery, etc.
3. TYRE
Check for proper inflation pressure and tire crack damage.
4. SUSPENSION
Check the suspension for oil leaks and damage to rubber parts, and check the connection between the body and the tires.
5. BRAKE
Check for problems such as brake pad levels, brake oil leaks from brake calipers, and damage to rubber parts.
6. BEHIND
We check the underside of the vehicle for oil and water leaks and other problems such as damage to rubber parts.
7. TEST DRIVING
The mechanic will perform a drive test to see if there are any unusual noises while driving and how well the brakes work, and then make a final check.
8. PREPARATION
After all inspections are completed, we will compile a report on the condition of the vehicle and hand it over to you.
FLOW
HOW TO INSPECT?
National-certified mechanics will perform inspections and maintenance.
FLOW
HOW TO INSPECT?
National-certified mechanics will perform inspections and maintenance.

1. VISIT STORE
We will take care of your car, and we will take your car in order. Please call us in advance to make a reservation to shorten the waiting time.

2. QUOTATION
We will check each part of the vehicle for tightness, wear and tear and any damage. We will prepare an estimate, taking into account the parts recommended for repair at the time of inspection, the parts that need to be repaired at the next inspection, and the parts that need to be inspected regularly.

3. INSPECTION
We will start the work after you confirm the details of the estimate. If additional maintenance or part replacement is required during the inspection, we will contact you again to discuss your needs.

4. TEST DRIVING
After the inspection and maintenance work is completed, the vehicle is commissioned for a final check to make sure there are no problems.

5. DELIVERY
Payment is due at the time of delivery. Based on the condition of your car, we will also give you an estimate of when the next inspection is due and advice on driving and maintenance.